System Specifications
Detection Range 1 ppm to 100 ppm
Display Range Default 0 ppm to 100 ppm configurable during commissioning
Repeatability 5% to +5% see Note 1
Accuracy 15% to +15% see Note 1
Measurement Frequency Continuous with optional modes of 15 20 30 and 60 minutes available upon request
Ambient Temperature 0 °C 32 °F to 40 °C 104 °F see Note 2
Water Temperature 1 °C 34 °F to 40 °C 104 °F see Note 2
Analog Output 4 mA to 20 mA scalable to the required range with a maximum load of 900 Ω
Analog Output Isolation 400 V DC
Relay Voltage Maximum 50 V with alarm and fault relays featuring NO contacts
Relay Current Maximum 5 A
Service Interface USB A to PC using the provided Multisensor Software
Data Storage Uses a μSD card with up to 6 months of storage capacity
Instrument Case Rated IP65 NEMA 4X
Instrument Weight 5 kg 11 lbs
Instrument Dimensions 300 x 200 x 132 mm 11 8 x 7 8 x 5 2 inches
Sampling Chamber Material Stainless steel with PVC available as an option
Sampling System Weight 12 kg 26 lbs without water
Sampling System Dimensions 570 x 490 mm 22 x 19 inches mounted on its own PVC backboards
Sampling System Capacity 3 liters 0 79 US gallons
Flow Limit Switch Contacts close if flow falls below the set point option available upon request
Water Flow Rate 2 lmin 0 52 US gpm
Supply Voltage
AC Version 90 V AC to 240 V AC 50 Hz or 60 Hz
DC Version 10 V DC to 15 V DC
Power Consumption
Maximum 9 W
Typical during operation 7 W
Note 1 ±15% accuracy from 20 to 100 ppm measured using a 50 ppm toluene solution at standard temperature and pressure
Note 2 Climate control may be required depending on process and ambient conditions
Ini demo, bisa diisi apa saja
Ini demo, bisa diisi apa saja
Ini demo, bisa diisi apa saja
Ini demo, bisa diisi apa saja
Produk Tridinamika tersertifikasi jaminan SNI
Ini hanya demo
Free
Jasa Pengiriman kilat oleh tim Tridinamika
Ini hanya demo saja
2-3 Days
Free
The MS1700 is an on line oil in water analyzer designed to detect and measure hydrocarbon concentrations in water up to 100 mgl in industrial processes refineries and petrochemical complexes
Using a state of the art contactless technology the MS1700 provides a solution that is not affected by turbidity and can detect all the volatile hydrocarbons independently from their fluorescence properties
Applications
Oil detection in Cooling Water
Oil detection in produced water
Detection of phenols in discharge water
Effluent monitoring
Pre filtration monitoring
Oil in wastewater
Filter protection
Features and benefits
No sensor contact with water low maintenance no sensor cleaning
Measures both Polycyclic Aromatic Hydrocarbons PAHs and VOCs
Electronic Nose not affected by turbidity
Can be calibrated for specific substances used to monitor known spills
Catches fluorescent and non fluorescent compounds
Alarms to SCADA and other communication interfaces
For more information on the principle of operation click on the FAQs tab
Request a Quote
The MS1700 oil in water analyzer is designed to detect concentrations of up to 100 mgl and it’s used in a variety of applications such as
Oil in cooling water
Hydrocarbons are an ever present class of compounds in industrial processes factories and industrial plants of all sorts A leaking piece of equipment a corroded heat exchanger a leaking diesel pump or simply an accidental spill can mean that cooling water gets contaminated with hydrocarbons When this happens an oil in water analyzer like the MS1700 can help to detect contamination in the cooling water early on before it creates major issues
Phenols
Phenols are widely used in industry as one of the starting material to produce plastics explosives and drugs however they can be harmful for the environment and companies that deal with phenols need to comply with very strict emission limits
Influent water
Wherever water and hydrocarbons get mixed together in a process refineries petrochemical processes etc there is a need to treat this water before it’s used further down in the process or discharged into the environment This influent water has usually got high levels of hydrocarbon and depending on the incoming level the treatment can be optimised
| Brand |
Multisensor |
|---|
