The SCR Elektroniks 3 station Switch Endurance Test Bench is designed to verify the endurance testing of household and rocker switches as per IEC 60669, IS 3854 and BS EN 60669. Typical switch ratings covered are for the entire range (typically 6 – 45 A) for both 3 phase and single phase loads. The tests included (that can be customized) are as follows: 1. Normal Operation (Referred to as Cl 19.1 in IEC 60669, IS 3854 and BS EN 60669) 2. Making and Breaking Capacity (Referred to as Cl 18.1 in IEC 60669, IS 3854 and BS EN 60669) 3. Temperature Rise (Referred to as Cl 17 in IEC 60669, IS 3854 and BS EN 60669) 4. Fluorescent Lamp Load (Referred to as Cl 19.2 in IEC 60669, IS 3854 and BS EN 60669) 5. Tungsten Filament Lamp Load (Referred to as Cl 18.2 in IEC 60669, IS 3854 and BS EN 60669)
Ini demo, bisa diisi apa saja
Ini demo, bisa diisi apa saja
Ini demo, bisa diisi apa saja
Ini demo, bisa diisi apa saja
Produk Tridinamika tersertifikasi jaminan SNI
Ini hanya demo
Free
Jasa Pengiriman kilat oleh tim Tridinamika
Ini hanya demo saja
2-3 Days
Free
Specification:
* Stand-alone unit after initial configuration of test parameters: The panel is capable to generate accurate test results even after days of continuous operation with no loss of data.
* Single / Three Phase operation possible
* Servo controlled mechanism to control current (+/- 1%) against incoming fluctuations
* CT range selection for current measurement accuracy
* Load selection is selector switch based: Quick and easy
* PLC based timer unit (Siemens Logo or Siemens S7 with touchscreen) for quick and easy user interface and automated operation: Easy setting of parameters such as on time, off time, no. of cycles and threshold consecutive contact weld, contact open cycles
* Accurately designed iron core inductors (Optional air core inductors as per customer specifications) for circuit parameter accuracy. Specially designed fixture for safe operation with operator safety in view
* Cooling shall be provided by means of optimally placed Exhaust fans distributed all over to remove the hot air generated inside the panel cabinet: This avoids change in circuit parameters as a result of over heating of loads
* Ceramic core wire wound resistors with enamel coating: This ensures best quality of resistors that have a favourable resistance v/s temperature rise graph enabling operation for an elongated duration with accuracy
* Temperature rise test can be integrated with the main endurance test
* PC based option available: Complete PC data logging and control plus online plotting of temperature rise graphs
* Total Voltage and current range of the source: 200-270 V , 6-57 A AC (Depending upon the switch ratings selected)
* Load Current options: 6, 10, 13, 15 16, 20, 25, 32, 45 Amp for Normal Operation and 1.25 times 6, 10, 13, 15 16, 20, 25, 32, 45 Amp for Making-Breaking test (Also respective test currents for fluorescent lamp load (Load A and Load B) and tungsten filament lamp load). Rated Voltage Options: 220 V, 230 V, 240 V and 250 V (As per user specifications)
* Power Factor: 0.3 for Breaking Capacity and 0.6 for Normal Operation
* User Specified Number of Phases: 3 phase or 1 Phase
* For temperature rise test: k type Cr / Al thermocouples with upto 12 temperature channels (customizable) per phase
* 50 / 60 Hz operation as per incoming line frequency
* Pneumatic Pressure: approximately 8 bar. Class 1 Accuracy (for current and voltage display
| Brand |
SCR Elektroniks |
|---|
