PC Based Temperature Rise Test Bench 10ka (25ka 5sec) For Cables And Connectors, It is used to measure rise in temperature at various points as mentioned in standard at junctions.
The set-up consists of a Thyristorized (Solid state controlled) Current Source (to maintain the Current even as impedance of the cable changes due to rapid temperature rise), a specially designed step down transformer system, PC based control system, Temperature data logging on PC, Servo-Controller and other indications. Digital voltmeter Primary Voltage indicates the position of auto transformer (variac).
Servo controlled mechanism is used to maintain constant current throughout the test in manual mode. CR/AL(‘K’ type) type thermocouples are used for temperature sensing.
Ini demo, bisa diisi apa saja
Ini demo, bisa diisi apa saja
Ini demo, bisa diisi apa saja
Ini demo, bisa diisi apa saja
Produk Tridinamika tersertifikasi jaminan SNI
Ini hanya demo
Free
Jasa Pengiriman kilat oleh tim Tridinamika
Ini hanya demo saja
2-3 Days
Free
Specification :
* Input Supply: Three Phase 415 VAC, 300 Amps, 50 Hz Max.
* Output: Current Source 50A to 10KA Cont & 25KA 5Sec
* CT range selections: 200, 500, 1KA, 2KA, 5KA, 10KA, 20KA, 25KA.
* Selection of output voltages, the ranges are 1.25V, 2.5V,3.75V, 5.0V, 6V, 7.5V selection through switches.
* Two operating modes are provided: PC & MANUAL.
* 12 Channels, Cr/Al type Thermocouple sensor for temperature sensing with PC data logging.
* Servo controlled mechanism for maintaining the Test Current at preset value in manual mode.
| Brand |
SCR Elektroniks |
|---|
