HT Italia HTA105 Hot wire digital anemometer
Measurement of wind speed in m/s: m/s or Km/h or ft/min or MPH or knots
Air temperature/humidity measurement with in-built sensor: 0°C to 50,0°C
Measurement of air relative humidity in %RH: 0% RH to 100% RH
Dimensions (L x W x H): 190 x 65 x 45mm (7 x 3 x 2in)
Length of telescopic probe: from 13cm to 1m (from 5in to 3ft)
Length of telescopic probe cable: 170cm (6ft)
Diameter of telescopic probe: 11mm (0.4in)
Weight (battery included): 240g (8ounces)
Weight of telescopic probe: 165g (6ouces)
Air speed sensor: hot-wire
Air temperature sensor: digital sensor
Mechanical protection: IP40
Battery type: 1x9V alkaline battery IEC 6F22.
Battery life: ca 15 hours (backlight ON), ca 20hours (backlight OFF)
Auto power OFF: about 20 minutes of idleness
Operating temperature/humidity: 0°C ÷ 50°C / <80%RH
Storage temperature/humidity: -10°C ÷ 60°C / <80%RH
Max height of use: 2000m
Product Details
Hot wire digital thermo anemometer with temperature, humidity and air speed measurement
HTA105 was designed for air speed measurement with selection of European or Anglo-Saxon measuring units.
The hot wire anemometer carries out measurements using an extensible telescopic probe capable of taking also measurements of temperature and humidity thanks to its built-in sensors.
Additional functions include measurement of air volumetric flow rate (CMM and CFM parameters) as well as calculation of average values in space and time. HTA105 is fitted with MAX/MIN and Data HOLD function in addition to an internal memory to store air speed measuring results.
It is provided with a back-lighted double display and auto power off to save internal battery life.
| Brand |
HT Italia |
|---|
